3 CCD Reduction Optical System
(3 CCD of RGB 7450 pixels)
Main scanning (horizontal) direction 600dpi
Sub scanning (vertical) direction 600dp
Range of Scan Resolution
100 - 2400dpi
Binary mode (Line, Line/Photo, Photo)
8 bit gray mode
24 bit color mode
Sheet through type
Sheet type, Board type
Maximum reading width
Width 210mm to 1066.8mm (42”)
Length 210mm to 16000mm
Thickness 0.05mm to 16.0mm
NOTE 1 : Upper Document Feeder can accept the original which thickness is 0.05 to 0.1mm.
NOTE 2 : Lower Document Feeder can accept the original which thickness is 0.05 to 16.0mm.
NOTE 3 : In case of the board type document, the maximum length is 1219.2mm (48”).
NOTE 4 : In case of the board type document, the maximum weight is 2.2kg/square meter.
Placement of document
NOTE : Offset placement is available so far as the sensors on center detect the document.
Warm up time
Less than 10 seconds
256MB DDR DIMM
Windows 7, Vista, XP and 2000
NOTE : KIP2300 supports only 32 bit version of the above OS.
USB 2.0 for controlling & image data transfer
HIL (High-speed Image Link) for image data transfer
NOTE : Connected PC needs to have a PCI Express card slot for installing the HIL Card.
Voltage :100 - 240V +6%/-10%
Frequency :50 or 60Hz
Max. power consumption
Less than 120W
(US : 120V / EUR and ASIA : 200-240V)
During scanning :120W
Stand by :50W
In Power Save Mode :0W
1366mm (Width) x 543mm (Depth) x 323mm (Height)
(Document Guides, Document Tray and Scanner Stand are excluded.)
Temperature :10 - 32 degrees centigrade
Humidity :15 - 85%RH (No dew)
Recommended :23 degrees centigrade and 60% RH (No dew)
Stand by :Less than 60db
During scanning :Less than 65db
Impulse sound :Less than 70db