KIP C7800


Subject Specification
Model KIP c7800
Type Console
Printing method LED Array Electro Photography
Color CMYK
Photoconductor Organic Photoconductive Drum
Print speed Color : 100mm / second max. (4.6ppm / 36”x48”) (4.7ppm / A0)
(for Roll Deck 3), speed varies by media type)
Mono : 120mm / second
Heavy : 60mm / second
Exposure method Multi-Level (tone number 9) LED Print Head
Resolution 600dpi x 2400dpi
Print width Maximum : 914mm (36 inches)
Minimum : 297mm (11 inches)
Print length Maximum :
Plain Paper / Bond 5x Standard Roll Deck 3
Plain Paper / Bond 2x Standard Roll Deck 1, 2
Tracing Paper / Vellum 1x Standard  
Film 1x Standard  
Glossy Paper 1x Standard  

Minimum : 210mm (8.5 inches)

NOTE : If the print is longer than 6m, KIP does not guarantee
image quality or the reliability of media feeding system.

Warm up time Shorter than 6 minutes
(At 23 degrees centigrade, 60% RH and 220V)
First print time Shorter than 35 seconds (36 x 48 inches) (for Roll Deck 3, Color)
Fusing method Heat roller fusing
Development Contact type mono component non-magnetic development system
(Initial toner is unnecessary. One toner cartridge contains 1kg.)
Charging method Corona
Transfer method Transfer roller
Media feeding method Automatic (*3 Roll Decks) and manual (**20 cut sheets capacity)

* Image quality on A3, 15”, 12”, 11” width roll media is guaranteed with
using Roll Deck 3 only
** A2 - A4 (24” - 11”) in Landscape orientation only

Input power 220 to 240V (+6% to -10%), 20A and 50/60Hz
Interface Ethernet 10BASE-T, 100 BASE –TX, 1000 BASE-T
USB 2.0 (5VDC max)
Power consumption On 230V, 50/60Hz 3.6 kw (Maximum)
Stand by 0.8 Kwh (Average)
Printing 2.2 Kwh (Average)
Warm up 3.4 Kwh (Average)
Acoustic noise Less than 65db (Printing)
          NOTE : Impact noise such as cutting sound is excluded.
Less than 60db (Stand by)
Ozone Less than 0.05ppm (Average of 8 hours)
Dimensions 1376mm (Width) x 790mm (Depth) x 1450mm (Height)
Weight About 540kg
Media Plain Paper / Bond:
Color mode: 70 to 150g/m2
          * For heavier media (90 to 150g/m2), use media type setting “Heavy”.
Mono mode: 70 to 75g/m2
Temperature: 15 to 27 degrees centigrade
Humidity      : 20 to 70% RH
Storage condition of
Print media:  Wrap the media surely to shut out the humidity.
Toner         : Keep the toner cartridge away from the direct
                    sunlight, and store it in the condition of 0 - 35 oC
                    and 10 - 85% RH.