Model KIP 7770
Configuration Console
Printing method Electro photography
Photoconductor Organic Photoconductive Drum
Print speed 120mm per second
(Inch) E: 5 sheets/min D Landscape: 9 sheets/min
(Metric) A0: 5 sheets/min A1 Landscape: 9 sheets/min
Print head LED
Resolution 600dpi x 2400dpi
Print width Maximum :36” / 914mm
Minimum Roll:
-11” / 297mm
-Cut sheet (Portrait): 8.5” / 210mm
Print length Maximum(Standard)
-6,000mm (bond, 36” / A0 wide only)
-or “5 x Standard length” (bond)
-“2 x Standard length” (vellum)
-“1 x Standard length” (film)

(Option) 24,000mm
Minimum 8.5” / 210mm
NOTE: If the print is longer than the standard maximum listed
above, its image quality or the reliability of paper feeding is
not guaranteed.

Warm up time Less than 2 minutes
(23 degrees Centigrade, 60% RH and the rated voltage / Bond)
First print time 21 seconds (A0 from Roll 1)
Fusing method Roll Fuser
Development method Dry type with non-magnetic mono-component toner
Exposure method LED
Charging method Corona
Transfer method Corona
Separation method Corona
Input power 220V - 240V plus 6% or minus 10%, 50/60Hz, 20A
Power consumption Maximum: 3,120w
Stand by :1.1kwh (Average)
Printing   :2.1kwh (Average)
Cold Sleep : Conformity to International Energy Star

230V, 50/60Hz and Dehumidify Heater is ON

Acoustic noise less than 65db (Printing)
less than 55db (Standby)
Ozone less than 0.05ppm (Maximum)
Dimensions 1370mm (Width) x 725mm (Depth) x 950mm (Height) (w/o UI)
1702mm (Width) x 725mm (Depth) x 1377mm (Height, max) (w/ UI)
Weight Approx. 333kg (2 Roll Type)
Approx. 375kg (4 Roll Type)
Media (Recommended Media)
US model:
-Plain Paper 64g/m2 to 80g/m2, US Bond (PB-20)
-Tracing Paper US Vellum (XV-20)
-Film 4MIL (PF-4DME)

Europe/Asia model:
-Plain Paper 64g/m2 to 80g/m2, Diamond Plain Paper (80g/m2)
-Tracing Paper Gateway Tracing Paper (73g/m2 )
-Film NSF4MIL Film

Environmental condition
for usage
Temperature: 10 to 32 degrees Centigrade
Humidity: 15 to 85% RH
Interface Ethernet (10 BASE-T, 100 BASE-TX, 1000 Base-T)
Serial port (RS232-C)
USB 2.0
Storage of consumables (Media)
Wrap the media surely to shut out the humidity.
(Toner cartridge)
Keep the toner cartridge away from the direct sunlight, and store
it in the condition of 0 to 35 degrees Centigrade and 10 to 85%